Have you ever forgotten the code to your Sports Afield safe? Here’s a quick guide on how to reset the code so you can get back to protecting your valuables.
Checkout this video:
Locate the control panel on the front of the safe.
The control panel is located on the front of the safe, above the keypad. There will be a small hole in the center of the control panel. Insert the tip of a ballpoint pen or a paperclip into this hole and press and release the reset button inside.
Find the “Reset” button on the control panel.
The reset button is usually located on the control panel near the keypad. It may be labelled “reset” or have a symbol of a circular arrow next to it. In some cases, you may need to open the control panel door to locate the reset button.
Press and hold the “Reset” button for three seconds.
If you have forgotten the code to your Sports Afield safe, you can reset it by pressing and holding the “Reset” button for three seconds. This will reset the code to the factory default, which is “1-2-3-4.”
Enter the new code into the control panel.
To change the code on your Sports Afield safe, you will need to enter a new code into the control panel. The control panel is located on the back of the safe, near the bottom. There are four buttons on the control panel, labeled “0,” “1,” “2,” and “3.”
To enter a new code, press and hold the “0” button for three seconds. This will cause the light on the control panel to turn red. Then, enter your new four-digit code by pressing the appropriate buttons. For example, if your new code is 1234, you would press “1,” “2,” “3,” and “4” in that order. Once you have entered your new code, press and hold the “0” button again for three seconds. This will cause the light on the control panel to turn green, indicating that your new code has been successfully entered.
Press the “Enter” button on the control panel.
All Sports Afield safes come with a factory default code that can be changed at any time. If you forget your new code, or if you want to reset the safe for any reason, you can do so by following these simple instructions.
1.Press the “Enter” button on the control panel.
2.Enter the factory default code (the code is located in the owner’s manual).
3.Press the “9” key on the control panel.
4.Enter your new code twice, then press the “Enter” button.
5.Press the “9” key again to exit programming mode.